• Mon–Sat 6am–6pm · Free pickup Sydney & NSW
  • South Granville, NSW 2142

Lismore Scrap Metal Collection at a Glance

City and postcodeLismore, NSW 2480
Local government areaLismore City Council
RegionNorthern Rivers — approximately 730 km north of Sydney
Lead serviceCopper recycling (bare bright, #1, #2, insulated, wire)
Also collectedBulk scrap metal, bulk solar panel recycling
Minimum load3 tonnes per collection. Under-3t loads collected for a fee
PaymentInstant bank transfer once the load is weighed and graded
SchedulingPlanned Northern Rivers runs — best suited to project volume
Areas coveredLismore, South Lismore, North Lismore, East Lismore, Goonellabah, Alstonville, Wollongbar, Clunes, Nimbin, Casino, Ballina, Byron Bay
Phone0411 398 285
Emailinfo@copperrecyclesydney.com.au

Who This Service Is Actually For in Lismore

Being straightforward about it: we are based in South Granville in Sydney, about 730 kilometres and more than eight hours south. We are not a Lismore yard and we do not claim to be one. A haul that long only makes sense for substantial loads, which means this page is written for a specific group of people rather than everybody.

Where we are a genuinely good fit:

  • Demolition, strip-out and site clearance contractors handling volume across multiple properties, where metal accumulates faster than a local yard run can absorb it.
  • Civil and infrastructure contractors on the region’s restoration works — pipework, structural steel, plant and cabling from large projects.
  • Builders on rebuild and house-raising programs, where steel framing, roofing, guttering and copper pipe come out in quantity.
  • Commercial and industrial sites around Goonellabah and South Lismore clearing plant, racking or production equipment.
  • Rural properties consolidating machinery, fencing wire and sheds — often decades of accumulation at once.

Where we are not: a household with a trailer load, or anyone needing same-day collection. Lismore has local options that will serve you better for those, and we will say so if you call. There is no sense in either of us wasting the conversation.

Lismore Is in the Largest Infrastructure Phase in Its History

This matters for anyone holding recoverable metal in the region, because it is the reason volume exists here right now.

Lismore City Council has proposed a $218.4 million capital works program for 2026–27 — described by the council as the largest infrastructure and flood recovery construction phase in its history — supported by around $209.7 million in grant funding. The council’s Flood Restoration Portfolio has already completed more than 135 projects, with the next phase intensifying activity across the region. Major works include the South Lismore Sewage Treatment Plant restoration, which relocates essential infrastructure to higher ground, and the Browns Creek Pump Station upgrade. The Landslip Restoration Package remains a major focus, addressing up to 60 separate sites.

On the housing side, the Resilient Homes Program — at $880 million, Australia’s largest disaster recovery program of its kind — wound up in March 2026. Applications for Resilient Measures closed on 31 March 2026, and homeowners have until 20 December 2026 to submit a building scope of works, which means a concentrated period of house-raising and retrofit construction is still underway. Lismore City Council has also turned to precinct planning for roughly 40 hectares of land parcels vacated through the buy-back scheme, and through the Resilient Lands Program Landcom and the NSW Reconstruction Authority are progressing the Crawford Road project in East Lismore, with the potential for more than 500 homes on land at lower flood risk, alongside 50 build-to-rent apartments.

Civil restoration, house raising, retrofit, demolition and new residential construction all produce recoverable metal — structural and light-gauge steel, roofing and guttering, copper pipe and cabling, pipework, plant and fittings. Resilient rebuilding also tends to favour steel over timber, which lifts the proportion of metal coming off these jobs relative to a conventional build.

Copper recycling collection Lismore NSW

Copper Recycling in Lismore

Copper is our lead material. In Lismore it comes mainly from building work: copper pipe and fittings from rebuilds, retrofits and renovations, cabling from rewires and new builds, hot water system replacements, and switchboard work on commercial and rural properties. Civil and infrastructure projects add cabling and motor windings from pump stations and plant. Rural electrical work on pumps, sheds and irrigation contributes steadily across the surrounding hinterland.

We handle bare bright, #1 and #2 copper, insulated cable, copper wire, pipe and fittings, and busbar from switchboard work. Grading is done at our facility and itemised on your transaction record, so the settlement figure traces back to what each grade contributed. See our copper scrap and copper wire scrap pages for grading detail.

Bulk Scrap Metal Recycling in the Northern Rivers

Alongside copper we recycle bulk ferrous and non-ferrous scrap from Lismore commercial, industrial, construction and rural sites. This is a bulk-only service — we do not purchase small lots or individual items, and loads are assessed as a whole.

Typical Northern Rivers collections include structural and light-gauge steel from demolition and rebuilds, roofing iron and Colorbond sheeting, guttering and downpipes, steel framing offcuts, pipework and fittings from civil works, decommissioned plant and pumps, hot water systems and appliances from strip-outs, air conditioning units, racking and shelving from commercial changes, stainless steel from commercial kitchens and food operations, farm machinery and fencing wire, and mixed metal from site clean-outs.

Solar Panel Recycling in the Northern Rivers

Bulk solar panel recycling is an additional service for installers, commercial property owners and rural sites across the region. Solar panels are classified as e-waste in NSW rather than standard scrap metal, bringing separate handling, storage and transport obligations — and compliant options are thinner on the North Coast than in Sydney. The Northern Rivers has high solar uptake and a significant number of arrays were damaged or replaced following the floods, which has left installers and property owners holding panel volume. We collect at 3 tonnes and above. See the solar panel recycling page.

About Lismore and the Surrounding Region

Lismore sits on Bundjalung Country in the Northern Rivers of NSW, on the Wilsons River about 730 kilometres north of Sydney and roughly 40 kilometres inland from Ballina. It is the commercial and administrative centre for a wide agricultural hinterland and has historically been the region’s service hub, with Southern Cross University, a base hospital, and the retail and professional services that support the surrounding towns.

The regional economy rests on agriculture — macadamias, sugar cane, beef and dairy across the Richmond and Wilsons River valleys — alongside health, education, construction and government services. The main industrial and commercial land sits at South Lismore and around Goonellabah to the east, with council planning having identified expansion of the Goonellabah industrial precinct as part of the city’s longer-term growth strategy, given the flood constraints on lower-lying areas.

Surrounding centres include Casino about 30 kilometres west, Ballina and Alstonville to the east, Byron Bay to the north-east, Nimbin to the north, and Grafton further south. The NSW Reconstruction Authority maintains a Northern Rivers office in Molesworth Street, Lismore.

What We Collect in Lismore

MaterialTypical Lismore and Northern Rivers sources
Copper — bare bright, #1, #2, insulatedRebuild and retrofit plumbing, rewires, switchboard work, pump station plant
Copper wire and cableElectrical contracting offcuts, civil project cabling, rural shed and irrigation wiring
BrassPlumbing fittings, valves, taps, hydraulic services hardware
Stainless steel — 304 and 316Commercial kitchens, food and dairy operations, fabrication offcuts
Aluminium — extrusion, sheet, castWindow and door replacement, facade work, trailer and equipment components
Roofing iron and sheet steelRe-roofing, demolition, rebuild and house-raising work
Air conditioning unitsSplit and ducted systems from replacement and rebuild work
Electric motors and pumpsCivil and water infrastructure plant, irrigation, decommissioned machinery
Ferrous and structural steelDemolition, steel framing, guttering, farm machinery, fencing wire, sheds
Solar panelsInstaller stock turnover, damaged and replaced arrays, commercial decommissioning

Catalytic converters, batteries, car engines and electric motors are accepted within a qualifying bulk load rather than purchased as individual items.

Types of scrap metal collected in Lismore NSW

How to Prepare a Load for a Lismore Collection

  • Give us an accurate tonnage estimate. On a 730-kilometre run the vehicle is committed well ahead, so this is the most useful thing you can tell us. Roofing iron looks like more than it weighs; steel framing weighs more than it looks.
  • Keep non-metal out where you can. On demolition and rebuild sites metal and general waste tend to end up in the same pile, and timber, plasterboard, concrete and silt all reduce assessed weight.
  • Consolidate to one accessible staging point. Particularly across multi-property demolition work, where material otherwise ends up spread over several addresses.
  • Tell us about access and ground conditions. Northern Rivers sites can be soft after rain, and river-flat access varies considerably.
  • Flag hazards early. Refrigerant-charged units, batteries, residual fluids and anything requiring specific handling need identifying before we attend.

How Collection Works

1

Tell us what you have

Call 0411 398 285 or submit an enquiry with material types, approximate tonnage, the site address and your project timeline.

2

We assess and schedule

We confirm the load qualifies at 3 tonnes, check access and vehicle requirements, and slot it into a Northern Rivers run. You get a realistic window, not an optimistic one.

3

We collect

Our team attends with the appropriate vehicle and lifting equipment, loads the material and leaves the site clear.

4

Weighing, grading and instant payment

The load is weighed and graded, you receive an itemised transaction record, and funds are transferred to your account on settlement.

Who We Work With in the Northern Rivers

  • Demolition, strip-out and site clearance contractors
  • Civil and infrastructure contractors on restoration works
  • Builders working on rebuilds, house raising and retrofits
  • Electrical, plumbing and roofing trades
  • Commercial and industrial operators at South Lismore and Goonellabah
  • Farmers and rural property managers across the hinterland
  • Solar installers and decommissioning projects
  • Facilities and property managers handling commercial fitouts

Areas We Cover Around Lismore

Our Northern Rivers runs cover Lismore, South Lismore, North Lismore, East Lismore and Goonellabah, along with Alstonville, Wollongbar, Clunes, Bexhill, Nimbin and the surrounding rural areas of the Lismore City Council LGA, plus Casino, Ballina and Byron Bay. Where volume justifies it, Lismore collections are combined with other North Coast sites including Coffs Harbour and Port Macquarie on the run south. The full list is on our service areas page.

If you are a contractor with volume across several Northern Rivers sites, that is exactly the situation where a scheduled run works well — call and we will work out a cadence rather than treating each address as a separate booking.

Responsible Recycling and Compliance

Copper Recycle Sydney operates as a registered scrap metal business under the NSW Scrap Metal Industry Act 2016. For anyone selling to us in Lismore that means payment is made by bank transfer rather than cash, we record each transaction along with the seller’s details, and photo identification is required at the point of sale. These obligations apply to every registered dealer in NSW and exist to keep stolen metal out of the recycling chain.

For contractors on publicly funded restoration work, the documentation side is usually the more relevant point: a recorded transaction with an itemised grade breakdown and an electronic payment trail is generally what project reporting and audit requirements ask for. Instant bank transfer gives you the speed of an immediate settlement with the paperwork intact.

Material collected from the Northern Rivers is sorted, graded and processed back into manufacturing supply chains. Copper can be recycled indefinitely without loss of performance, and structural steel recovered from a demolition returns to the steel supply chain rather than to landfill — which matters in a region that has had to remove a great deal of material from a great many properties.

Frequently Asked Questions — Scrap Metal Recycling in Lismore

Do you collect scrap metal in Lismore NSW?
Yes, for bulk loads. Copper Recycle Sydney collects scrap metal and copper across Lismore and the Northern Rivers, primarily from demolition and rebuild contractors, civil and infrastructure crews, trades, commercial sites and rural properties. Collections are scheduled as planned Northern Rivers runs. Call 0411 398 285 with your tonnage and location.
You’re based in Sydney — is Lismore really worth the trip for you?
For substantial loads, yes. Lismore is about 730 kilometres and more than eight hours north of our facility, so a collection has to carry genuine volume to make sense — which is why this service is aimed at contractors and projects rather than households. Where a contractor has material across several sites, or a project is generating metal over weeks, a scheduled run works well. Where someone has a trailer load, it does not, and we will tell you that rather than take the booking.
What is the minimum load size for a Lismore collection?
3 tonnes and above per load, across copper, general scrap metal and solar panels. Distance makes that threshold firmer here than in metropolitan Sydney.
What happens if my load is under 3 tonnes?
We can collect it for a fee rather than paying you for the material, quoted before we attend. In the Northern Rivers the more practical option is usually to accumulate material or coordinate with another contractor working nearby so one collection covers both. Local Lismore drop-off options will also suit smaller quantities better.
How do you pay, and how quickly?
By instant bank transfer on settlement. Once your load is weighed and graded, funds go to your account — no payment terms, no waiting period, no cheque. You also receive an itemised breakdown showing what each grade contributed.
Do you pay cash for scrap metal?
No, and nor can any registered dealer in NSW. Section 12 of the Scrap Metal Industry Act 2016 prohibits paying for scrap metal with cash, a cheque payable to cash, or in kind with goods or services, and section 12A prohibits advertising that you will. Instant bank transfer is the compliant equivalent, arrives just as fast, and leaves a record — which is usually what project reporting needs anyway.
Do you work with demolition and rebuild contractors?
Yes — these are our best-suited Lismore collections. Demolition, house raising, retrofit and rebuild work produces structural and light-gauge steel, roofing iron, guttering, copper pipe and cabling in real volume. For work running over weeks or months we can schedule recurring collections against the program rather than treating each removal as a separate booking.
Can you handle material from civil and infrastructure restoration projects?
Yes. Pipework, structural steel, plant, pumps, motors and cabling from civil works are straightforward bulk collections, and larger projects can be scheduled as staged removals. If you need documentation suitable for project reporting, say so when you book — every collection comes with a recorded transaction and an itemised grade breakdown.
Do you buy individual items, like a single hot water system or battery?
No. We do not purchase small lots or individual items. Hot water systems, appliances, catalytic converters, batteries and motors are accepted within a qualifying bulk load of 3 tonnes or more.
What types of metal do you collect in Lismore?
Copper in all grades — bare bright, #1, #2, insulated cable, wire and pipe — is our lead material. We also collect brass, stainless steel in 304 and 316 grades, aluminium, roofing iron and Colorbond sheeting, structural and light-gauge steel, guttering, air conditioning units, electric motors and pumps, farm machinery and fencing wire, and solar panels. Mixed loads are assessed and graded on arrival.
Do you collect from farms and rural properties around Lismore?
Yes. Superseded machinery, fencing wire, irrigation and stock water pipe, old implements, sheds and silos add up past 3 tonnes faster than most people expect once consolidated. The main thing that helps is gathering material into one accessible staging area with truck clearance before we arrive, rather than leaving it spread across paddocks.
Can you access sites with soft ground or difficult approaches?
It depends on the site, and it is worth sorting out before we book rather than on the day. Northern Rivers ground can be soft after rain, and river-flat access varies. Tell us about gate widths, gradients, turning space and ground conditions when you call and we will send something appropriate — or tell you honestly what would need to change first.
How long does it take to arrange a Lismore collection?
Longer than a metropolitan pickup. We batch Northern Rivers collections, so timing depends partly on what else is scheduled in the region — and improves considerably if your load can be combined with others nearby. Call with your details and we will give you a realistic window. If you are working to a project milestone, say so upfront.
Do you provide bins for ongoing collection?
Yes, where there is somewhere safe and accessible to place one. This suits contractors on extended projects particularly well — material accumulates in the bin between scheduled runs rather than requiring a call-out each time. See our free bins page.
What identification or paperwork do I need?
Photo identification is required when selling scrap metal in NSW, and we record the transaction with the seller’s details. For builders, contractors and businesses this is usually handled through the entity details and an authorised contact.
How is the value of my load calculated, and does distance affect it?
Loads are valued by weight and grade at current market rates, with each material weighed and graded separately and itemised on your record. Scrap prices move daily with global commodity markets and the exchange rate, so rates are quoted at collection rather than fixed in advance. Transport is a real cost over 730 kilometres and factors into what a Northern Rivers collection returns — we would rather say that plainly than pretend distance is free.
Do you collect from Lismore households?
Only where the 3-tonne minimum is met, which household quantities almost never reach. If you are a Lismore resident with a smaller quantity, a local drop-off or the council waste facility will serve you considerably better, and we will say so if you call.
Are you a licensed scrap metal dealer?
Yes. Copper Recycle Sydney operates as a registered scrap metal business under the NSW Scrap Metal Industry Act 2016, administered by the NSW Police Force. Registration involves criminal record and background checks and must be renewed periodically. Our ABN is 82 419 348 954.

Book a Scrap Metal Collection in Lismore

If you have 3 tonnes or more of copper, scrap metal or solar panels at a Lismore or Northern Rivers site, call 0411 398 285 or email info@copperrecyclesydney.com.au. Tell us the material types, rough tonnage, the site address, your project timeline and anything we should know about access.

Copper Recycle Sydney
South Granville, NSW 2142 (servicing Lismore & the Northern Rivers)
Phone: 0411 398 285
Email: info@copperrecyclesydney.com.au
Hours: Monday – Saturday, 6am – 6pm
ABN: 82 419 348 954