

Scrap Metal Prices in Newcastle NSW
If you are searching for scrap metal prices in Newcastle, the honest answer is that nobody can give you a fixed figure that stays true for more than a day. Scrap metal is a globally traded commodity and rates move with world markets, the exchange rate and local demand. What you can get — and what this page sets out — is exactly how your load will be valued, what pushes the number up or down, and how to tell a real quote from a padded one.
Copper Recycle Sydney is a bulk recycler collecting copper, scrap metal and solar panels across Newcastle and the Hunter. Our minimum is 3 tonnes per load, copper is our lead service, and qualifying loads are settled by instant bank transfer the moment your load is weighed and graded.
| City and postcode | Newcastle, NSW 2300 |
| Region | Hunter — approximately 160 km north of Sydney via the M1 Pacific Motorway |
| How prices are set | By weight and grade, at market rates on the day of settlement |
| Highest-value common material | Bare bright copper, then #1 copper, then #2, then insulated cable |
| Minimum load | 3 tonnes per collection. Under-3t loads collected for a fee |
| Payment | Instant bank transfer once the load is weighed and graded |
| Quote validity | Indicative only — confirmed at collection, because rates move daily |
| Areas covered | Newcastle, Mayfield, Carrington, Kooragang, Tomago, Beresfield, Cardiff, Thornton, Lake Macquarie, Maitland, Port Stephens |
| Phone | 0411 398 285 |
| info@copperrecyclesydney.com.au |
Five things, in roughly this order of impact.
1. The metal, and its grade. Copper is worth many times more per tonne than steel, but the grade within copper matters just as much as the metal itself. Bare bright — clean, unalloyed, uncoated wire — sits at the top. Then #1 copper (clean tube and heavy gauge, unsoldered), then #2 (soldered, painted or oxidised), then insulated cable, which is priced on its recoverable copper content rather than its gross weight. Brass, stainless steel and aluminium each sit in their own bands. A mixed load is valued grade by grade, never averaged.
2. Global commodity markets. Copper, aluminium and nickel trade on the London Metal Exchange in US dollars, so when LME copper moves, Australian scrap rates follow within days. The AUD/USD exchange rate matters just as much — a weaker Australian dollar lifts local scrap prices even when the underlying metal price is flat. That is why rates sometimes shift with no obvious market news attached.
3. Contamination and preparation. This is the factor you control. Copper pipe with brass fittings still attached grades lower than clean pipe. Cable with heavy insulation recovers less per gross tonne than bare wire. Timber, plastic, concrete and general waste in a load reduce its assessed weight and can push material into a lower grade. Separating what you reasonably can, before collection, is the most reliable way to improve what a load returns.
4. Volume. Bulk loads are far more economic to collect, transport and process than small ones, which is why our minimum is 3 tonnes. Below that threshold a collection costs more than the material returns — which is why under-minimum loads attract a fee rather than a payment.
5. Logistics. Distance, site access, loading difficulty and whether specialised equipment is needed all factor into a regional collection. Newcastle is about two hours from our facility, so it is comfortably serviceable — but a difficult site is a real cost, and an operator who pretends otherwise is recovering it somewhere else in the rate.
| Material | Grade notes | Indicative rate |
|---|---|---|
| Bare bright copper | Clean, unalloyed, uncoated wire 1.6mm and above | [[RATE]] |
| #1 copper | Clean tube and heavy gauge, unsoldered, no fittings | [[RATE]] |
| #2 copper | Soldered, painted or oxidised | [[RATE]] |
| Insulated copper cable | Priced on recoverable copper content, not gross weight | [[RATE]] |
| Brass | Mixed fittings, valves, taps | [[RATE]] |
| Stainless steel | 304 and 316 grades | [[RATE]] |
| Aluminium | Extrusion, sheet, cast | [[RATE]] |
| Ferrous / heavy steel | Structural, plate, machinery | [[RATE]] |
Indicative ranges only, last reviewed [[DATE]]. Scrap prices move daily with global commodity markets and the exchange rate. Your actual rate is confirmed at collection, after weighing and grading. We do not hold rates for loads booked in advance — and neither does anyone else who is being straight with you.
A few things worth knowing before you compare Newcastle operators:
We give you a rate against current market levels, and confirm whether the load clears the 3-tonne minimum.
We attend with the appropriate vehicle and lifting equipment, and leave the site clear.
The load is weighed and graded material by material, you get an itemised breakdown, and funds are transferred to your account on settlement — no payment terms, no waiting, no cheque.
Newcastle sits about 160 kilometres north of Sydney at the mouth of the Hunter River, and it remains one of Australia’s most concentrated industrial economies. That concentration is why bulk scrap is available here in a way it simply is not in most regional cities.
The obvious anchor is Tomago Aluminium, Australia’s largest aluminium smelter and its single largest electricity consumer, producing up to 590,000 tonnes a year — close to 40 per cent of national aluminium output — and drawing roughly 12 per cent of the entire NSW grid [web:19]. It employs about 1,000 people directly and supports around 5,000 more indirectly. In August 2026 the federal and NSW governments committed $2.5 billion over ten years to secure the smelter’s transition from coal-fired power to firmed renewables, ending a genuinely uncertain period after Rio Tinto and its partners flagged possible closure beyond 2028 [web:29][web:21]. For the Hunter’s metals supply chain — the maintenance contractors, fabricators, logistics operators and suppliers clustered around a facility like that — the decision means continuity, and continuity means sustained industrial activity and sustained recoverable metal.
Beyond Tomago, the Port of Newcastle and the Kooragang Island precinct drive heavy logistics and bulk handling. Mayfield, on the former BHP steelworks land, and the surrounding Steel River precinct carry engineering, fabrication and industrial services [web:20][web:32]. Cardiff, Beresfield and Thornton hold warehousing and light industrial operations, and the Hunter Valley mining supply chain reaches into all of them. Add the Williamtown defence and aerospace precinct to the north, the University of Newcastle, and sustained commercial construction through the CBD and Honeysuckle, and the result is a city that turns over copper, steel, stainless and aluminium continuously.
| Material | Typical Hunter sources |
|---|---|
| Copper — bare bright, #1, #2, insulated | Industrial electrical contracting, switchboard and plant room refits, mining supply chain maintenance |
| Copper wire and cable | Industrial reels and offcuts, power and control cabling from decommissioning |
| Brass | Plumbing and mechanical services fittings, valves, marine hardware |
| Stainless steel — 304 and 316 | Fabrication offcuts, food and beverage processing, port and marine fittings |
| Aluminium — extrusion, sheet, cast | Manufacturing offcuts, transport equipment, window and facade fabrication |
| Air conditioning units | Commercial mechanical services upgrades |
| Electric motors | Pumps, conveyors, decommissioned industrial and mining plant |
| Ferrous scrap and structural steel | Demolition, racking removal, plant decommissioning, site clean-outs |
| Solar panels | Installer stock turnover, commercial array decommissioning |
Catalytic converters, batteries, car engines and electric motors are accepted within a qualifying bulk load rather than purchased as individual items. See our copper scrap, copper wire scrap and solar panel recycling pages for grading detail.
Copper Recycle Sydney operates as a registered scrap metal business under the NSW Scrap Metal Industry Act 2016. For anyone selling to us in Newcastle that means three things: payment is made by bank transfer rather than cash, we record each transaction along with the seller’s details, and photo identification is required at the point of sale. These obligations apply to every registered dealer in NSW and exist to keep stolen metal out of the recycling chain — a live concern in a region carrying as much cabling and infrastructure as the Hunter.
Bank transfer is not a delay. Funds move on settlement, the moment your load is weighed and graded, and both sides end up with a record of the transaction — which matters if your business has its own reporting or audit obligations. What you lose is notes in an envelope. What you gain is speed with a paper trail, which for any legitimate commercial seller is the better trade.
If you have 3 tonnes or more of copper, scrap metal or solar panels in Newcastle or the Hunter, call 0411 398 285 or email info@copperrecyclesydney.com.au. Tell us the material types, grades if you know them, and rough tonnage, and we will give you a current indicative rate and confirm scheduling.
Copper Recycle Sydney
South Granville, NSW 2142 (servicing Newcastle & the Hunter)
Phone: 0411 398 285
Email: info@copperrecyclesydney.com.au
Hours: Monday – Saturday, 6am – 6pm
ABN: 82 419 348 954